My 2000 XR650R (Aussie spec, road legal with uprated stator
and all the electrics) was not the most ideal base for this build. There were
many signs of its age showing, and as new shiny parts started to arrive I knew
I had to make the old things look new again!
The first thing to tackle was the frame. I took it to a
local bike paint shop and came out feeling let down. The guy I spoke to was
friendly but he didn't look positively on getting my frame sanded and
painted/powder-coated. His exact words were: "it'll take a lot of
hours", "won't be cheap" and "I have never done a dirt bike
frame before, the oil tank is a problem".
I decided to sand these areas by hand, using first a 240
paper and then a 400 to finish. It took several hours and also an electric
drill with wire brush bit to get at all the corners and provide an even finish.
I had to sand lightly to finish, and only in one direction to create a nice
'brushed' aluminium look. End result is it looks great! It will be open to the
elements and I don't expect it to stay this nice, but I can always maintain it
my lightly sanding it again.
Using a top quality aluminium polish also adds a layer to
protect the exposed aluminium from the elements.
**For any purists reading this: I discovered that the 1x
bike also had 'brushed' aluminium on the uprights, so this method is in line
with the real thing ** :)